Olicom A400A Manual do Utilizador

Model: A400AADSL Router User's GuideVersion 1.19(August 9, 2001)

82. Installation of the application program of Router AP1. Start operation system.2. Place the CD into your CD-ROM drive. Remember to allow the drive

9Configuration1. Configuring the ADSL routerWhen you power up the router and launch the application program ofADSLRouter and select "ADSL Router

10Options are : Serial port, Network Serial port :You can use the attached console cable to connect therouter and a personal computer to configure, a

11When you have logged in successfully, the Graphic User Interface (GUI)will appear on the window to let you configuration the router.The menu of Quic

122. Quick SetupGathering Configuration InformationBefore you configure this ADSL router, you need to gather informationabout your networks. Most user

13PPPoEThe Bridged protocol data unit is encapsulated using RFC 1483 protocolover an ATM network and this operation supply PPPoE function to letthe ro

14In the case of PPP connection, the remote access server will beassign this field automatically. Unless you should fill it by manual.7. Idle time ou

15RFC 1483 bridge (EoA)Bridged protocol data unit is encapsulated using RFC 1483 protocolover an ATM network and this operation mode using ATM/ADSL to

166. Click the OK button to store your modified configuration inthis ADSL router memory. Or click Cancel button to return tomain page.Note: Please e

17Routing over RFC 1483 bridgeBridged protocol data unit is encapsulated using RFC 1483 protocolover an ATM network and this operation mode use ATM/AD

ContentsImportant Safeguards ... 1Overview ...

185. Netmask: Enter the subnet mask for the network connected tothis virtual circuit in the Netmask field.The subnet mask specifies which bits of the

19RFC 2364 PPPoAThe Framing PPP packet is encapsulated using RFC 2364 protocolover an ATM network and this operation mode use PPP/ATM/ADSL tomake a PP

206. Remote DNS: Enter the IP address of your domain name serverin the Remote DNS field.A domain name server is a network computer responsible format

21IPoA (RFC 1483 route)The Routed protocol data unit is encapsulated using RFC 1483 protocolover an ATM network and this operation mode connect and co

226. Gateway: Use the Gateway Address field to specify the IPaddress of the default IP gateway.7. Remote DNS: Enter the IP address of your domain name

233. Advanced ConfigurationLANIf you want to customize the settings for the Ethernet interface on yourrouter, enter or change following information in

24DHCPDynamic Host Configuration Protocol (DHCP) is most used on LAN tomanage IP on each host, specifically used on Virtual IP environment.In DHCP Ser

252. IP: Specify the first address from the DHCP client. It shouldbe within the same subnet you have configured on your LANand should not be the same

26In DHCP Client mode, you can get IP address and related informationfor this router from DHCP server.1. IP Address: The IP address of the device2. Su

27 Fixed You can assign some correspondence Mac Address tosome fixed IP. Please input Mac address andcorresponding IP address. After you click the

1Important SafeguardsRead and understand all instructions.follow all warnings and instructions marked on the product.Environmenty In-house stationary

28IP SharingUsually for the home user or the SOHO user, you only can apply oneor a few Internet IP Addresses which sometimes are not enough formany ho

296. Internal port: Enter the port number your virtual server serviceuse.The range of this field is 0 to 65534.7. Click Add button to save information

30NAT Local address1. Base address: Enter the local (virtual) IP address you want toenable for address translation.2. Range: Enter the number of local

31NAT Global address1. Base address: Enter the global IP address you want to enablefor address translation.2. Interface: Use the dropdown menu to sele

32Fixed NAT mapping1. Local address: Enter the local (virtual) IP address you want toenable for fixed address translation mapping.2. Global address: E

33Routing Protocol (RIP)RIP sends routing-update messages at regular intervals and when thenetwork topology changes. When a router receives a routing

34 Generic Specifies a number of stability features. To adjust forrapid network-topology changes and prevents routingloops from continuing indefinite

352. Interface: Use the dropdown menu to select a number from 1to 8 (please refer the settings in ATM & VC service mode).3. Mode: Use the dropdown

36ISP (Internet Service Provider)If you have several ISP accounts, you can input the related informationof each ISP on this window. It can let you c

37Spanning TreeThe Spanning Tree algorithm that is used to avoid packet looping inyour network.1. Service: Click Enable to turn on spanning tree servi

2OverloadingDo not overload wall (mains) outlets and extension cords as this canresult in the risk of fire or electric shock.ServicingTo reduce the ri

38SNMPThe Simple Network Management Protocol (SNMP) lets a networkadministrator monitor problems on a network by retrieving settings onremote network

39Community tab1. Community: Identify the SNMP communities to which the A400Abelongs by entering a community name in the CommunityField.By default, th

40Trap tab1. Version: Use drop down menu to select the version.2. Community: Enter the name of the community for which thetrap destination is responsi

41ATM Interface & VCsThis ADSL router connect/communicate with WAN via ATM/ADSL. Inthe ATM structure, this ADSL router has VC (Virtual Circuit) f

424. Special FunctionPacket FilterThis ADSL router provides a simple protection against those unwantedinformation/data from passing through LAN to WAN

435. Or you can restrict certain IP address to deny the LAN orenter it. Enter the restricted IP address in the IP field andrelated information (Mask,

445. MaintenanceUser ProfileThis item provides you to manage each user's information and the limitof authority. This ADSL router let different u

45Supervisor tabYou may click Supervisor button to change the supervisor password.

46MonitorThis item provides the current information about the operation of ADSLrouter and there are three options (Route, ADSL and ATM) for you tomoni

47Show SettingThis item provides a summary of some function configurations, you mayget the information you want quickly or print the information.Click

3Overview1. Packing listBefore set up the machine, inspect it visually for damage that mighthave occurred during shipment. Make sure the box contains

48Packet Filter Rule No. Priority Action Protocol Source Address Source Mask Source Port Destination Address Destination Mask Destination Port 1

49F/W UpgradeYou can install new firmware in the router from any computer capableof functioning as a Trivial File Transfer Protocol (TFTP) server or F

50Save configuration to file & Restore configurationfrom fileThese two utilities are especially for system backup. When you haveconfigured the s

51Reboot SystemSome functions are not able to start to work after configuration. Youneed to Save and Reboot the system to active those new settings.N

52TroubleshootingBelow are the potential problems you may run into and the possiblesolutions. After each problem description, some instructions are p

42. Taking a look at the ADSL router2.1 Front ViewLED Name State Meaning ADSL on ADSL line is ready for data transmission flash ADSL line is re

52.2 Rear View The LINE port lets you connect the device to one or more remotenetworks over a ADSL connection. The PHONE port lets you connect to

6Installation1. Setting up the routerThe location environmentPlace the router in a location where air can circulate freely around it.The router case h

7a. Plug the RJ-14 end of console cable into the CONSOLE port on therouter back panel.b. Connect the other DB-9 end of console cable to a serial port